Thursday, 28 February 2013

Urgently Needed: Offshore Drilling Operations Superintendent (Night)

NES Global Talent Indonesia - An Oil and Gas Recruitment Consultants based in Jakarta and Head Office in Manchester UK which supplies some of largest organization in the world with high quality technical and engineering experts and has supported the top names in Oil and Gas for 30 years.

Currently our client a Multinational Operator Company in Oil & Gas industry in Indonesia requires  position for their project.

Company : Major Multinational Operator Oil & Gas Company

Employment Status : Permanent (with 3 month Probation)

Work Location : TBA

Salary : Open

Open for : National (Indonesian)

Position :

Offshore Drilling Operations Superintendent (Night)

Deep Water Experience, SBM Experience, HPWBM Knowledge, Deep Water Cementing knowledge, Offshore HSE in general (HUET and Offshore Survival), Assist for MEDEVAC, IWCF or Wellcap.


Assist the Drilling Operations Manager in undertaking the Risk Management studies and its implementation to ensure that all offshore drilling operations are properly risk assessed before implementation.
Support the Drilling Management Team in controlling PTW (Permit to Work) and SIMOPS (Simultaneous Operations) activities.                                                                                                                  
 Support the Drilling Operations Manager in ensuring that all drilling activities adhere to well programs and instructions - and ensuring that any changes in the drilling operations be communicated with the Drilling Operations Manager for approval.                          
Support the Drilling Operations Manager in managing and directing all well site activities through (i) supervision of critical operation activities (ii) management of service company performance (iii) ensuring that all planned operations are risk assessed (iv) managing interfaces of Rig Contractors and Aviation/Supply Chain Contractors. (v) proper follow ups and close out of all NPT or failures related to all rig operations
Support  the Drilling Operations Manager in ensuring that all drilling activities conducted according to safety standards through: (i) ensuring that all portable equipment are inspected for their operational fitness (ii) monitoring of safety critical maintenance activities (iii) proper investigation, reporting, and actions for all safety incidents                                                                            
Support the Drilling Superintendent Operations Manager in ensuring that all drilling operation activities adhere to the environment rules, regulations and standards through:  (i) ensuring transportation, storage and use of radioactive sources are in line with HSEMS (ii) ensuring procedures for segregation of waste (iii) ensuring that all waste materials back loading from the rig is in accordance with laws, rules and regulations as well as company standards.                          
Support the Drilling Operations Manager in assuring proper coordination through (i) conducting coordination morning calls - offshore teams and Jakarta operation team to report the progress (ii) providing input into well programs.


Academic degree in Mechanical Engineering or any other Engineering Sciences.
A minimum of 10 years in the Oil & Gas industry with a minimum of 7 years in the Drilling Engineering and/or Operations.              

Please send me your updated CV to (alamsyah.lani@nesglobaltalent) and I will let you know as soon as possible if your qualification is matched with any of our clients requirements. Thank you

Wednesday, 27 February 2013


As one of the largest global providers, Weatherford helps build innovative mechanical solutions, technology applications, and services for all phases of oil and gas developments. Weatherford operates in over 100 countries and employs more than 40,000 people worldwide.
We are seeking to find highly qualified candidates for the following position:

·         Student / Fresh Graduate from Industrial Engineering, Management, or related
·         Able to work in team or work individually
·         Good interpersonal skills
·         Good knowledge of relevant computer software.
·         Ability to work to tight deadlines
·         Good in Bahasa Indonesia & English communication skills (written and verbal)
For 3-6 months you will get experiences and knowledge about mentioned area in a real practices. We offer career growth in an exciting, challenging and rewarding professional environment both in the position advertised and beyond.
To apply, please send your application and CV with INTERNSHIP-Asset as subject
before March 14th, 2013
NOTE: Only candidates that meet the above qualification will be shortlisted

Monday, 18 February 2013

FO position available at Legian Beach Hotel

Dear All,

A well established hotel called Legian Beach Hotel with 218 rooms in  the area of Legian is looking for young, dynamic and talented persons for the position of:
GSA (Female)
Japanese native speaking GRO (Female)
Bellboy (Male)

• Mature and dynamic, good performance and kind personality
• Experience in the same field minimum one year at reputable villa or 4/5 stars hotel
  Good Communication Skill in English ( Other Languages are Advantage)
• Able to work as a team
• Able and willing to support other department as needed (multi-skills)
Applicants please bring up dated and complete CV with recent photograph and requested salary package at earliest possible:

Human Resources Department
Attn. Mr. Kadek Agung Kawijaya
Legian Beach Hotel
Jl. Melasti - Legian Kelod
Legian, Kuta
Phone: 62-361-751711
E-mail: or
website : legianbeachbali. com
Only short listed and qualified candidates will be contacted for interview

Thank you and kind regards,

Two vacancies_Planning Engineer_KZ

Vacancy 1 – Planning Engineer with experience in Ship Building / Offshore Construction
Vacancy 2  – Planning Engineers for Investment and Commercial Issues.

Main Terms & Conditions for Planning Engineer:
Planning Engineer - (SINGLE STATUS)
Work Location  
Kashagan Kurik Ersai Yard, Kazakhstan
Contract type  
International contract with secondment
12 months renewable
90/21 (90 consecutive calendar days on site followed by 21 paid calendar days of leave)
Working days/hours
208 hours monthly (8 hours / 6 days a week, from Monday to Friday)
USD 3500 per Month
Over time rate
USD 25.25
Free accommodation provided in line with Company's standard.
Insurance D&D
100'000 USD
Life Insurance
30'000 USD
Medical Insurance
Basic (see attached package)
Income protection
From work incapacity day 1** up to 30 calendar days
On site
100% of the contractual salary *
After repatriation and arrival in country of domicile
30% of the expected annual income according to the contractual work leave rotation cycle broken down to a monthly basis*
From work incapacity day 31 (whether on site or in country of domicile) up to 120 calendar days
30% of the expected annual income according to the contractual work leave rotation cycle broken down to a monthly basis*
Prepaid Economy class ticket at beginning, end of CNT and for each work leave rotation cycle
Pre employment Expenses
On company account
Role Description
▪ Establish and manage effectively a planning and progress control system in order to support the Project Manager decision making process and allow him to  complete the project according to the internal baselines and in compliance with the contractual dates and requirements
▪ Ensure any deviation from plan is promptly spotted and analyzed, final time impact is estimated and the effect of corrective actions taken is monitored
▪ Create a schedule awareness atmosphere among all project participants
During the commercial phase:
▪ Ensure the development of the project schedule according to the commercial needs. Verify feasibility and criticality
▪ Participate to the commercial risk management activities
At project start up:
▪Ensure the implementation of the Planning and Progress Control System required by the contract complexity, riskiness and duration, in compliance with the Project Breakdown Structure, Company Standards and Contract specifications
▪ Interface and coordinate with other Company Functions or Discipline Leaders/Supervisors and Managers to build up activities, assign milestones and constraints by issuing the logic network
▪ Prepare all the reference baseline documents, and ensure that the project s planning and scheduling requirements are properly and clearly communicated to those functionally responsible for executing the work
▪ Issue all the relevant reporting
▪ Issue the Planning & Scheduling Procedure, Progress Measurement Procedure and Risk Management Plan for the Project Control Manager verification
▪ Coordinate the risk management activities startup organizing the first brainstorming and the qualitative / quantitative assessment of the identified risks & opportunities
▪ Perform the schedule risk analysis for highly critical projects.
During the project execution phase:
▪ Ensure the effectiveness of the Planning and Progress Control System, monitoring the progress measurement system and ensuring the proper information flow, progress status and completion forecast are assessed and reported for Engineering, Procurement, Fabrication, Construction and Commissioning phases
▪ Update all Project Schedules, collecting actual data, evaluating forecast dates and monitoring any progress and productivity Deviation compared with the baseline schedule, including the corrective actions taken by the PM
▪ Maintain the risk management process organizing periodic meetings and verifying the risk owners feedbacks
▪ Maintain records for all significant events, like contractual claims/obligations, productivity, deliverables, materials status, with extensive use of Company/Partner/Client IT systems and reports
▪ Create and maintain the 90 days look-ahead schedule, weekly, monthly. Isolate any adverse trend and warn the PM on time to take corrective actions, issue weekly and monthly project reports (internal and for the Client)
▪ Assist the Project Control Manager in the Project Status Report preparation
▪ Participate in the coordination meetings (internal or with the Client whenever opportune)
▪ Support the Project during the contract changes/claims process providing the time impact analysis.
At project closure:
▪ Support the Project Control Manager in the preparation of the Project close-out Report and the schedule and productivity feed-back data to Project Control and Commercial Department.
Send your CV to
Thanks and best regards,
Jl. Letjen Suprapto Komp. Mall Top 100 Block H1 No. 07 Batu Aji Batam
Telp. +62 778 743 2007

Thursday, 7 February 2013

Flexible Pipe Design Engineer Vacant for Multinational EPC Oil and Gas Company

Company : Major Multinational EPC Oil and Gas Company
Employment Status : TBA
Work Location : Kuala Lumpur, Malaysia
Availability Join Request : Soon
Salary : TBA
Open For : National (Indonesian) or Asia Pacific Expatriate


• Degree in either Civil, Mechanical, Resource, Chemical, Materials / Welding Engineering or Naval Architecture.
• Knowledge of offshore oil and gas industry and flexible pipe engineering.
• 8 - 10 years experience in offshore oil and gas industry with minimum 5 years experience in flexible pipe engineering.
• Knowledge of offshore oil and gas industry.
• Experience in flexible pipe engineering.
• Planning and organisation skills.
• Career ambition.
• Initiative.
• Communication skills and team player.
• Motivation.
• Ability to direct, guide and defend engineers along solution paths to achieve required performance criteria.
• Ability to work without supervision and actively seek assistance/support as appropriate.

Duties and Responsibilities:
• Understand and comply with project requirements, and relevant industry standards and regulations
• Perform flexible pipe design for risers and flowlines systems on SUBSEA Projects
• Perform dynamic risers systems analysis
• Interface with other engineering disciplines and drafting team
• Provide project support and technical assistance to manufacturing site/team
• Understand and comply with project requirements, and relevant industry standards and regulations
• Perform flexible pipe design for risers and flowlines systems on SUBSEA Projects
• Liaise with Drafting Office Team Leader on drafting resource requirements for projects.
• Interface with other engineering disciplines during the course of project execution.
• Participate in formal or informal reporting to Flexible Engineering Team Leader on status of engineering tasks lessons learnt and resources.
• Review engineering deliverables as required by squad check process.
• Manage standard and non-standard flexible pipe engineering performed by Engineering Consultants / Suppliers to meet project, statutory and Company Group rules to project schedule.
• Attend meetings with Clients, Suppliers and / or Consultants to assist on technical issues relating to flexible pipe engineering.
• As required by projects, manage procurement of either permanent or temporary material / equipment associated with flexible pipe engineering.
• Provide site engineering supervision / technical assistance for manufacturing, fabrication and / or installation site.
• Assist in preparation of tenders.
• In specific cases, undertake role of Project Manager for a flexible pipe engineering design study.
• In specific cases, undertake role in project as Engineering Team Leader for multi-discipline scopes of engineering work.
• Undertake flexible pipe engineering tasks as required by project.
• Undertake engineering tasks in other engineering disciplines.
• Assist Flexible Engineering Team Leader in development of Discipline Engineering Technical Notes and Guidelines.
• Show respect for co-workers.

• Project document deliverables register.
• Management of project team members.
• Engineering planning within assigned project.
• Drafting planning within assigned project.
• Engineering designs technically acceptable to other engineering disciplines.
• Trained engineers.
• Continual improvement of TOPL Engineering Team
• Overview of incorporation of flexible pipe engineering design requirements into other engineering deliverables.
• Management of technically correct, fit for purpose subcontractor engineering deliverable's. Knowledge of contractual, commercial and scheduling skills.
• Management of technical issues with external parties relating to flexible pipe engineering.
• Supply of permanent or temporary material / equipment that is technically correct / fit for purpose to schedule. Knowledge of contractual, commercial and scheduling skills.
• Successful completion of supply / installation as per project, statutory and Company Group requirements.
• Knowledge of tender process.
• Project Management of completed and technically correct flexible pipe engineering design study on time and to budget.
• Management of completed and technically correct engineering scopes of work on projects / tenders on time and to budget.
• Completed engineering tasks.
• Completed engineering tasks and increased knowledge of offshore oil and gas industry.
• Consolidation and improvement of Company Engineering.
• Professional working environment.

Please send me your updated CV to ( and I will let you know as soon as possible if your qualification is matched with any of our clients requirements. Thank you

Subscribe via email

Enter your email address:

Delivered by FeedBurner