Thursday 25 March 2010

VARIOUS VACANCIES IN LARGEST STEEL FACTORY IN ABU DHABI (PART 8)


 

POSITIONS:

 

71. IRONWORKS TECHNICIAN

72. MH MAINTENANCE SUPERVISOR

73. MH MAINTENANCE TECHNICIAN

74. MH SENIOR MAINTENANCE TECHNICIAN

75. SENIOR CRANE REPAIR SHOP TECHNICIAN

76. SENIOR DRP MAINTENANCE TECHNICIAN

77. SENIOR MACHINE SHOP OPERATOR

78. SENIOR SMP MAINTENANCE TECHNICIAN

79. SMP MAINTENANCE SUPERVISOR

80. SMP MAINTENANCE TECHNICIAN

 

JOB DESCRIPTIONS:

 

71. IRONWORKS TECHNICIAN

 

Department            : Mechanical Maintenance and Workshop

No. Of Vacancy       : 6

Salary                    : US$ 2462 – 2900 / month

 

The desired candidate must have a minimum of 1 years experience in a related field, and must have knowledge of the following:

a.    Integrated Steel Plant Mechanical Maintenance (Fabrication and Structural repair)

b.    Steel Plant Mechanical Maintenance as Technician (fabrication) / Welder

c.    fabrication and major repair activities during planned shutdown as well as breakdown of all related equipment and facilities in the Integrated steel plant

d.    Ability to take site measurements, perform marking, making templates, grinding, ability to use common machines e.g. hydraulic press, jacks, plate and pipe bending and shearing machines etc.

e.    Knowledge of various types of welding (Arc welding, Gas welding, Brazing and stainless steel welding) and gas cutting

f.     knowledge in selection of electrodes, preheating and post heating of work piece, weld joint preparation and other related welding aspects

g.    Knowledge and use of dye penetrate test for crack identification

h.    Proficiency in English Language

 

Also, I.T.I. (NCTVT) certificate or equivalent with Technical Training from reputed Institute/Industry is required.

Scheduled Deployment Date: July 2010


72. MH MAINTENANCE SUPERVISOR

 

Reference Code       : MMW-MHMaintSvr

Department            : Mechanical Maintenance and Workshop

No. Of Vacancy       : 1

Salary                    : US$ 3570 - 4326 / month

 

The desired candidate must have a minimum of 5 years experience in a related field, and must have knowledge of the following:

a.    Material Handling Plant Mechanical Maintenance

b.    Material Handling Plant Mechanical Maintenance in Supervisory or equivalent category

c.    execution of scheduled preventive maintenance, corrective maintenance and major repair activities as well as trouble shooting during breakdown for Conveyor systems, Stacker, Bucket elevators, Belt and vibro-feeders, Screening systems and vulcanisation of conveyor belts

d.    Leading a Maintenance crew (allocation of job, instruction and guidance to technician / mechanic etc.)

e.    ordering and controlling of spares and consumables, preparation of shift schedule and keeping overtime record

f.     Check list preparation and review of inspection findings for corrective action

g.    Working in SAP (Material Management and Plant Maintenance Module)

h.    Knowledge of IT (MS - Office) and communication Skill

i.      Proficiency in English Language

 

Also, a Diploma in Mechanical Engineering from recognized university is required.

Scheduled Deployment Date: April 2010


73. MH MAINTENANCE TECHNICIAN

  

Department            : Mechanical Maintenance and Workshop

No. Of Vacancy       : 9

Salary                    : US$ 2462 - 2900 / month

 

The desired candidate must have a minimum of 1 year experience in a related field, and must have knowledge of the following:

a.    Material Handling Plant Mechanical Maintenance

b.    Material Handling Plant Mechanical Maintenance as Technician / Fitter

c.    execution of preventive maintenance as well as breakdown maintenance of Material handling machine / equipment (Conveyor systems, Stacker, Bucket elevators, Belt and vibro-feeders, Screening systems and vulcanization of conveyor belts)

d.    taking equipment checklist reading

e.    doing trouble shooting and carryout site repairs

f.     Ability to do welding and gas-cutting job during maintenance

g.    Knowledge of proper torquing of fastener

h.    Knowledge of Mechanical Machines, Tools and tackles and their application

i.      Proficiency in English Language

 

Also, I.T.I. (NCTVT) certificate or equivalent with Technical Training from reputed Institute/Industry is required.

Scheduled Deployment Date: May-June 2010


74. MH SENIOR MAINTENANCE TECHNICIAN

 

Department             : Mechanical Maintenance and Workshop

No. Of Vacancy       : 1

Salary                    : US$ 3158 - 3355 / month

 

The desired candidate must have a minimum of 3 years experience in a related field, and must have knowledge of the following:

a.    Material Handling Plant Mechanical Maintenance

b.    Material Handling Plant Mechanical Maintenance as Senior Technician / Mechanic

c.    Material Handling Plant Mechanical Maintenance as Technician / Fitter

d.    execution of preventive maintenance as well as breakdown maintenance of Material handling machine / equipment (Conveyor systems, Stacker, Bucket elevators, Belt and vibro-feeders, Screening systems and vulcanization of conveyor belts) independently

e.    condition monitoring of equipment

f.     doing trouble shooting and carryout site repairs

g.    leading a group of Technician / Fitter (instruction and guidance to Technician / Fitter)

h.    Ability for decision making and resource requirements for undertaking any maintenance activity and Knowledge of proper torquing of fastener

i.      Proficiency in English Language

 

Also, I.T.I. (NCTVT) certificate or equivalent with Technical Training from reputed Institute/Industry is required.

Scheduled Deployment Date: May 2010


75. SENIOR CRANE REPAIR SHOP TECHNICIAN

 

Department             : Mechanical Maintenance and Workshop

No. Of Vacancy        : 1

Salary                    : US$ 3158 - 3355 / month

 

The desired candidate must have a minimum 5 years experience in the following:

a.    EOT Crane / Jib Crane Mechanical Maintenance (Overhauling & Major Repair)

b.    Inspection & maintenance of EOT Cranes for Steel plant / Heavy duty application as Senior Technician / Mechanic

c.    Inspection & maintenance of EOT Cranes for Steel plant / Heavy duty application as Technician / Fitter

d.    Assembly and overhauling of heavy/light duty machinery including rotary equipments, Electric Motors, Hydraulic and Pneumatic equipments

e.    Leading a group of Technician / Fitter (instruction and guidance to Technician / Fitter)

f.     Knowledge & skill of hand finishing, marking, drilling, tapping, torquing, reading Engg. drawings and understand limits, fits and tolerance

g.    Knowledge of Mechanical Tools & tackles & rigging of heavy equipment

h.    Ability for decision making & resource requirements for undertaking any assembly or overhauling job

 

Also, proficiency in English language and I.T.I. (NCTVT) certificate or equivalent with Technical Training from reputed Institute/Industry is a must.

Scheduled Deployment Date: May 2010


76. SENIOR DRP MAINTENANCE TECHNICIAN

 

Department             : Mechanical Maintenance and Workshop

No. Of Vacancy       : 11

Salary                    : US$ 3158 - 3355  / month

 

The desired candidate must have minimum 5 years experience in the following:

a.    Direct Reduction Plant Mechanical Maintenance

b.    Direct Reduction Plant Mechanical Maintenance as Senior Technician / Mechanic

c.    Direct Reduction Plant Mechanical Maintenance as Technician / Fitter

d.    Execution of preventive maintenance as well as breakdown maintenance of mechanical machine / equipment independently

e.    Condition monitoring of equipment

f.     Doing trouble shooting and carryout site repairs

g.    Leading a group of Technician / Fitter (instruction and guidance to Technician / Fitter)

 

Ability for decision making and resource requirements for undertaking any maintenance activity and Knowledge of proper torquing of fastener is an advantage.

Must have knowledge in IT (MS Suite) and proficient in English language.

Also, I.T.I. (NCTVT) certificate or equivalent with Technical Training from reputed Institute/Industry is a must.

Scheduled Deployment Date: May 2010


77. SENIOR MACHINE SHOP OPERATOR

 

Department            : Mechanical Maintenance and Workshop

No. Of Vacancy       : 3

Salary                    : US$ 3158 - 3355 / month

 

The desired candidate should have 5 years experience working in a related field and has knowledge in the following:

a.    Operation of a large size machine shop for Steel plant/ Heavy industry application

b.    Operation of a large size machine shop for Steel plant/ Heavy industry application as technician / turner or equivalent

c.    Operation of a large size machine shop for Steel plant/ Heavy industry application as Sr. technician / Sr. turner or equivalent

d.    Operation of work shop machines including NC & CNC

e.    Knowledge of machining standards, assembly limits-fits & clearances, surface finish and manufacturing tolerances

f.     Ability to operate all workshop machines, do tool setting, grinding & preparation independently

g.    Knowledge & skill of taking measurement during machining job

h.    Proficiency in English Language

 

Also, I.T.I. (NCTVT) certificate in machining trade or equivalent with Technical Training from reputed Institute/Industry is a must.


78. SENIOR SMP MAINTENANCE TECHNICIAN

 

Department             : Mechanical Maintenance and Workshop

No. Of Vacancy       : 11

Salary                    : US$ 3158 - 3355 / month

 

The desired candidate must have minimum 5 years experience in the following:

a.    Steel Melting Plant (EAF, LRF, CCM) Mechanical Maintenance

b.    Steel Melting Plant (EAF, LRF, CCM) Mechanical Maintenance as Senior Technician / Mechanic

c.    Steel Melting Plant (EAF, LRF, CCM) Mechanical Maintenance as Technician / Fitter

d.    Execution of preventive maintenance as well as breakdown maintenance of mechanical machine / equipment independently

e.    Condition monitoring of equipment

f.     Doing trouble shooting and carryout site repairs

g.    Leading a group of Technician / Fitter (instruction and guidance to Technician / Fitter)

 

Ability for decision making and resource requirements for undertaking any maintenance activity and Knowledge of proper torquing of fastener is an advantage.

Must have knowledge in IT (MS Suite) and proficient in English language.

Also, I.T.I. (NCTVT) certificate or equivalent with Technical Training from reputed Institute/Industry is a must.

Scheduled Deployment Date: April 2010


79. SMP MAINTENANCE SUPERVISOR

 

Department            : Mechanical Maintenance and Workshop

No. Of Vacancy       : 6

Salary                    : US$ 3570 – 4326 / month

 

The desired candidate must have a minimum of 5 years experience in a related field, and must have knowledge of the following:

a.    Steel Melting Plant (EAF, LRF, CCM) Mechanical Maintenance

b.    Steel Melting Plant (EAF, LRF, CCM) Mechanical Maintenance in Supervisory or equivalent category

c.    execution of scheduled preventive maintenance, corrective maintenance and major repair activities as well as trouble shooting during breakdown

d.    leading a Maintenance crew (allocation of job, instruction and guidance to technician / mechanic etc.)

e.    ordering and controlling of spares and consumables, preparation of shift schedule and keeping overtime record

f.     Check list preparation and review of inspection findings for corrective action

g.    working in SAP (Material Management and Plant Maintenance Module)

h.    Knowledge of IT (MS - Office) and communication Skill

i.      Proficiency in English Language

Also, a Diploma in Mechanical Engineering from recognised university is required.

Scheduled Deployment Date: May 2010


80. SMP MAINTENANCE TECHNICIAN

 

Department             : Mechanical Maintenance and Workshop

No. Of Vacancy       : 19

Salary                    : US$ 2462 - 2900 / month

 

The desired candidate must have minimum 3 years experience in the following:

a.    Steel Melting Plant (EAF, LRF, CCM) Mechanical Maintenance

b.    Steel Melting Plant (EAF, LRF, CCM) Mechanical Maintenance as Technician / Fitter

c.    Execution of preventive maintenance as well as breakdown maintenance of mechanical machine / equipment

d.    Taking equipment checklist reading

e.    Doing trouble shooting and carryout site repairs

f.     Ability to do welding and gas-cutting job during maintenance

g.    Knowledge of proper torquing of fastener

h.    Knowledge of Mechanical Machines, Tools and tackles and their application

 

Ability for decision making and resource requirements for undertaking any maintenance activity and Knowledge of proper torquing of fastener is an advantage.

Must have knowledge in IT (MS Suite) and proficient in English language.

Also, I.T.I. (NCTVT) certificate or equivalent with Technical Training from reputed Institute/Industry is a must.

Scheduled Deployment Date: June 2010


 

If you feel you are match with above positions, you are welcome to logon to http://career.esi-steel.com to apply your cv by yourself.

 

For more info's, please call us or click http://www.totaldata.co.id/jobsite_abudhabi.htm:

PT. Totaldata Persada

021-8477689, 021-84994728. Attn.: Ms. Puput/Mrs. Dini

 

Mr. Admin, thanks for the space.




No comments:

Post a Comment

Subscribe via email

Enter your email address:

Delivered by FeedBurner