Thursday, 18 March 2010

VARIOUS VACANCIES IN LARGEST STEEL FACTORY IN ABU DHABI (PART 5)



 

POSITIONS:

 

41. BI PRODUCT AND WASTE MANAGEMENT SHIFT CONTROLLER

42. WALKING BEAM FURNACE OPERATOR

43. BI PRODUCT AND WASTE MANAGEMENT SUPERVISOR

44. CONVEYOR OPERATOR

45. FINISHED AND SEMI FINISHED PRODUCT CRANE OPERATOR

46. FINISHED AND SEMI FINISHED PRODUCT DAY SUPERVISOR

47. FINISHED PRODUCT DISPATCH PLANNER

48. JETTY AND DRP SUPERVISOR

49. RAW MATERIAL OPERATOR

50. SEMI FINISHED PRODUCT SHIFT CONTROLLER

 

JOB DESCRIPTION:

 

41. BI PRODUCT AND WASTE MANAGEMENT SHIFT CONTROLLER

 

Department             : Material Handling

No. Of Vacancy        : 4

Salary                    : US$ 3158 - 3355 / month

 

The desired candidate must have a minimum of 3 years experience in the following:

a.    BP&WM section of a steel plant

b.    Processing & Recycling of byproducts & wastes

c.    Waste management/methods of waste disposal

d.    Developing policies and procedure requirements of ISO 9000, OHSAS 18000 and ISO 14000 and compliance to Environment regulations

 

University degree ( 10+2+3 Full time ) or technical diploma (10+3 full time) is a must.

Scheduled Deployment Date: June 2010


42. WALKING BEAM FURNACE OPERATOR

 

Department             : Heavy Section Mill

No. Of Vacancy        : 4

Salary                    : US$  / month

 

The desired candidate should have 8 years experience in relevant Steel Industry and must have an Engineering Diploma/Degree.

General Summary:
Plant: A 1mtpy Heavy Structural Section Mill capable of rolling a very wide and complex range of products to demanding customer tolerances with piece weights from 17 kg/m to 540 kg/m, run-out lengths up to 170 meters and final cut-lengths from 6 to 24 meters. Highly demanding product and process complexity and frequent fast paced product change-over's are key features of this 250 ton per hour, $450m steel mill.

Sub Plant: A walking beam furnace capable of reheating beam blanks of ~ 20 ton at 12mtrs long to a temperature of 1250degC at a nominal production rate of up to 250 ton/hour from a variety of cold charge beam blank and bloom types, qualities and lengths.

Skills Requirement:

a.    Check the burner and furnace condition for correct flame / mix

b.    Determine root cause of poor furnace operation through analytical interpretation of furnace screens and data

c.    Ensure accurate tracking and positioning of the pieces through the furnace to discharge

d.    Feedstock charge equipment to ensure optimal buffering and pacing for mill operations and planned outages

e.    Maintain the furnace temperatures and pacing to maintain beam blank temperature suitable for rolling

f.     Monitor and manage the furnace to ensure safe and stable operation at all times. Shut down the furnace in a safe manner in emergency conditions

g.    Monitor the feedstock identity, characteristics and profile to manage any discrepancies

h.    Planning and scheduling to ensure best optimization of available feedstock

 

Total Industrial experience in relevant Steel Industry

 

Deployment date will be 3rd quarter of 2011.


43. BI PRODUCT AND WASTE MANAGEMENT SUPERVISOR

  

Department            : Material Handling

No. Of Vacancy       : 2

Salary                    : US$ 3570 - 4326 / month

 

The desired candidate must have a minimum of 5 years experience in the following:

a.    BP&WM section of a steel plant

b.    Material handling section /Environment section

c.    Waste management/methods of waste disposal

d.    Processing & Recycling of byproducts & wastes

e.    Developing policies and procedure requirements of ISO 9000, OHSAS 18000 and ISO 14000 & compliance to Environment regulations

 

University degree ( 10+2+3 Full time ) or technical diploma (10+3 full time) is a must.

Scheduled Deployment Date: June 2010


44. CONVEYOR OPERATOR

  

Department             : Material Handling

No. Of Vacancy       : 1

Salary                    : US$ 1758 - 1983 / month

 

The desired candidate must have a minimum of 3 years experience in the following:

a.    Steel industry as Stacker/Hooper/Conveyor operator

b.    Safety aspects of conveyors, hoppers and stackers

c.    Equipments and controls

 

Minimum 10 years (full time) of school education, additional technical educational background is preferred.

Scheduled Deployment Date: May 2010


45. FINISHED AND SEMI FINISHED PRODUCT CRANE OPERATOR

  

Department             : Material Handling

No. Of Vacancy        : 19

Salary                    : US$  / month

 

The desired candidate must have a minimum of 3 years experience in the following:

a.    Crane operation in steel industries

b.    Rigging, lifting and Conversant with hand signals

c.    Inspection of cranes, tackles, magnets & minor adjustments

d.    Ability to fill inspection checklists and breakdown records Physique, vision and hearing, height & distance judgment ability of high standard

e.    Driving experience in UAE

 

Minimum 10 years (full time) of school education, additional technical educational background is preferred.

UAE driving license is an advantage.

Scheduled Deployment Date: September 2010


46. FINISHED AND SEMI FINISHED PRODUCT DAY SUPERVISOR

 

Department             : Material Handling

No. Of Vacancy        : 5

Salary                    : US$ 3570 - 4326 / month

 

The desired candidate must have a minimum of 5 years experience in the following:

a.    Material Handling section of a steel industry

b.    Supervisory/leadership experience

c.    Coordination amongst intersectional, interdepartmentally and with Contractors

d.    Report generation and analytical/statistical Skills

e.    Exposed to heavy material handling equipment such as cranes, forklifts etc.

f.     Problem solving ability

g.    Planning, organizing and storage of Semi finished & finished product materials

h.    Good English communication skills

 

University degree ( 10+2+3 Full time ) or technical diploma (10+3 full time) is a must.

Scheduled Deployment Date: September 2010


47. FINISHED PRODUCT DISPATCH PLANNER

 

Department             : Material Handling

No. Of Vacancy        : 3

Salary                    : US$ 2462 - 2900 / month

 

The desired candidate must have a minimum of 3 years experience in the following:

a.    Finished product section of a steel industry

b.    Exposed to heavy material handling equipment such as cranes, forklifts etc.

c.    Leadership experience

d.    Stock control experience & FIFO systems

e.    MS Office applications & SAP

f.     Good English communication skills

 

University degree ( 10+2+3 Full time ) or technical diploma (10+3 full time) is a must.

Scheduled Deployment Date: September 2010


48. JETTY AND DRP SUPERVISOR

 

Department             : Material Handling

No. Of Vacancy        : 1

Salary                    : US$ 3570 - 4326 / month

 

The desired candidate must have a minimum of 5 years experience in the following:

a.    Supervision and control of jetty operations in Material Handling department

b.    Material management, protection and salvage methods

c.    Planning receipt of material, safe transport, stacking, & feeding to operation requirement repairing discharge plan upon vessel arrival

d.    Supervision and control material supply to DR plant

e.    Coordination amongst employees, interdepartmental and contractors

f.     Planning and organizing, and stock management

g.    Stock management of raw materials


Also, a University Degree or Tehcnical Diploma is a must.

Scheduled Deployment Date: May 2010


49. RAW MATERIAL OPERATOR

 

Department             : Material Handling

No. Of Vacancy        : 4

Salary                    : US$ 1758 - 1983 / month

 

The desired candidate must have a minimum of 3 years experience in the following:

a.    Material handling department of a steel industry

b.    Storage and issue of materials under specific work direction

c.    Inspection, adjustment and checking of handling systems

d.    Safety procedures and standards

 

University degree (10+2+3 Full time) or technical diploma (10+3 full time) is a must.
Driving license in UAE is an advantage.

Scheduled Deployment Date: May 2010


50. SEMI FINISHED PRODUCT SHIFT CONTROLLER

 

Department             : Material Handling

No. Of Vacancy        : 9

Salary                    : US$ 3158 - 3355 / month

 

The desired candidate must have a minimum of 3 years experience in the following:

a.    Semi / Finished product section of a steel industry

b.    Exposed to heavy material handling equipment such as cranes, forklifts etc.

c.    Leadership experience

d.    Stock control experience & FIFO systems

e.    MS Office applications & SAP

f.     Good English communication skills

 

University degree ( 10+2+3 Full time ) or technical diploma (10+3 full time) is a must.

 

Scheduled Deployment Date: September 2010


 

If you feel you are match with above positions, you are welcome to logon to http://career.esi-steel.com

 

For more info's, please call us or click http://www.totaldata.co.id/jobsite_abudhabi.htm or call us:

PT. Totaldata Persada

021-8477689, 021-84994728. Attn.: Ms. Puput/Mrs. Dini

 

Mr. Admin, thanks for the space.


No comments:

Post a Comment

Subscribe via email

Enter your email address:

Delivered by FeedBurner